FLOWCAST- The most common problem, when usingFlowCastepoxy resin, is not having enough to finish your project. Specially if you are pouring a river table. The solution is simple:calculate your usage. When using a casting resin (or filling an area), calculate the total cubic inches and divide by 61.
FlowCastis a new casting epoxy made by EcoPoxy. It was developed to replace Liquid Plastic, which has been the epoxy resin of choice for river tables and any projects requiring a deep layer of resin. FlowCast is a better product which is used/applied the same way as Liquid Plastic 2:1 ratio. Improvements in several categories (like clarity, viscosity, air-release) make FlowCast a more user friendly epoxy with outstanding final results (increased strength and durability). But the greatest improvements are its resistance to crystallization and the increased bio-content!
The following information is for users ofFlowCastcasting epoxy is made for pouring layers 0.5 - 1.5 inches deep. Directions, advice, list of supplies and details to help you successfully complete your epoxy resin project.
FlowCast is a big improvement in several ways. Although it is similar in use, like Liquid Plastic 2:1 ratio, in terms of depth of pour, gel time and curing, FlowCasts' clarity, viscosity, and durability make it HANDS DOWN the best epoxy resin for river tables. Additionally, Flowcasts' incredible UV stability, record setting bio-content AND anti-crystallization formula have put EcoPoxy back on top of the epoxy wars!
Epoxy resin is sensitive to temperature and it's curing process can be compromised in low temperatures. Freezing causes the resin to crystallize or develop seed crystals and makes the resin much thicker than it's normal viscosity, reduce the polymer’s reaction rate, extend its cure time, and ultimately affect it's polymerization...