NEW! FlowCast SPR (Small Projects Resin) is the ideal casting epoxy for weekend woodworking projects. When used at one-inch thickness, the maximum volume, and under the recommended conditions, expect projects to cure within one day.
FLOWCAST- The most common problem, when usingFlowCastepoxy resin, is not having enough to finish your project. Specially if you are pouring a river table. The solution is simple:calculate your usage. When using a casting resin (or filling an area), calculate the total cubic inches and divide by 61.
Directions, advice, list of supplies and details to help you successfully complete your epoxy resin project. The following information is helpful when using FlowCast casting epoxy. This epoxy is made for pouring deep layers 0.5 - 1.5 inches deep. If this describes your project. this is for you.For clear coating projects, use UV Poxy.
FlowCast is a big improvement in several ways. Although it is similar in use, like Liquid Plastic 2:1 ratio, in terms of depth of pour, gel time and curing, FlowCasts' clarity, viscosity, and durability make it HANDS DOWN the best epoxy resin for river tables. Additionally, Flowcasts' incredible UV stability, record setting bio-content AND anti-crystallization formula have put EcoPoxy back on top of the epoxy wars!