SnowWhite | Product Info

SnowWhite Product Information

Mix Ratio

3:7:1 by weight - 2:5:1 by volume

Working Temperature

15-25ºC (60-77ºF)

Working Time

2 hours depending on ambient temperature

Cure Time

24 hours depending on ambient temperature, humidity and thickness

Recommended Thickness per Layer

1/2" - 1.5" per Layer. Maximum recommended pour depth of 1.5”. Not recommended for pours less than ½” depth

Set to Touch

10-14 hours at 1-1 ½”

Clean Up

Denatured Alcohol


How To Use SnowWhite

SnowWhite will cure more rapidly if left in pail. Have your mold ready, and pour epoxy immediately after mixing. Mold must be sealed thoroughly to avoid blowouts. Epoxy will flow like water, and can escape through even the smallest cracks.

Mix resin and hardener separately for 30 seconds. In a clean, dry container; combine (by weight) 3.7 parts resin with 1 part hardener, and mix thoroughly for 2 minutes.

Although pigments can be added, the effects will be very limited. For instance, if you were to add black to this rich white the best you’ll get is grey. Additionally, if you were to add in metallics, they will all turn white as the formulation of SnowWhite would overpower the metallics' effects.

Reapplying Coats

Between 14 - 24 hours providing the previous layer is firm but still tacky. Once tack-free it is necessary to sand between layers to ensure proper adhesion.

50 degrees F. through 77 degrees F. with tightly sealed lids.

Shelf Life

Epoxy has a shelf life of about 2 years providing it is properly stored in sealed containers.