FlowCast | Product Info

FlowCast: The Woodworker's Epoxy for Thick Pours!

FlowCast is a casting epoxy resin that looks like liquid glass. When the two parts are combined, it hardens to a crystal clear, durable finish to a maximum thickness of 1.5". Use FlowCast® epoxy by itself for a crystal clear finish or pigments can be added to create custom colors and effects.

FlowCast® can be worked using the same tools you already have for woodworking such as a lathe, table saw, or belt sander, leaving you thousands of possibilities to create beautiful projects. Be sure to check us out on social media for inspiration and see what other artists are making out of EcoPoxy.

Tips When Using FlowCast®

How To Use FlowCast®

In a clean, dry container; combine (by volume) 2 parts resin with 1 part hardener, and mix thoroughly for 2 minutes. Then add desired pigments, continuing to mix until the epoxy is completely colored. After mixing, pour the epoxy into your mold. See our Knowledge Base for more detailed tutorials.

Repouring Between Coats

Possible between 25 - 48 hours providing the previous pour is firm but still tacky. Once tack-free it is necessary to sand between layers to ensure proper adhesion.

55ºF through 85ºF with tightly sealed lids.

Shelf Life

Epoxy has a shelf life of about 2 years providing it is properly stored in sealed containers.

FlowCast Product Information

Mix Ratio

2:1 by volume

Working Temperature

21-27ºC (70-80ºF)

Pot Time

8 hours depending on ambient temperature

Workable/Cure Time

72 hours depending on ambient temperature, humidity, and thickness

Recommended Thickness per Layer

1/4" - 1.5" per Layer. Maximum recommended pour depth of 1.5”. Not recommended for pours less than ½” depth

Viscosity (Thickness)

Low Viscosity to Fill Tight Spaces and Excellent Air Release

Cure Appearance

Crystal Clear

Bio Content

35%

Pigments Can Be Added

Yes

Clean Up

Denatured Alcohol