EcoPoxy Made Easy

Materials That Won't Stick to Epoxy Resin

Materials That Won't Stick to Epoxy Resin

When molding and casting, it is important to know what mold materials are compatible with EcoPoxy casting resins. If you choose to build a mold, we...
NEW FlowCast SPR

NEW FlowCast SPR

NEW! FlowCast SPR (Small Projects Resin) is the ideal casting epoxy for weekend woodworking projects. When used at one-inch thickness, the maximum volume, and under the recommended conditions, expect projects to cure within one day.
Bubble free UV Poxy glass-like finish top coat by HalfBakedArt

Bubble Free Epoxy! How To Get a Perfect Finish with UV Poxy

NO BUBBLES in Epoxy Resin!

Understanding the secret to a perfect "glass-like" finish using EcoPoxy UV Poxy, or other epoxy resin for coating, is easy. Following a few simple steps to prevent air bubbles is essential. Then I will explain how to properly use heat to de-gas, or remove, the bubbles after your pour.

MOST COMMON CAUSES OF AIR BUBBLES: All of these can be avoided! 
Overheating - No seal coat - Humidity - Temperature - Improper mixing - Layer too thick or too thin
All-about-Bloxygen-on-epoxy.us

Protect Your Investment: All About Bloxygen

► WHO SHOULD USE Bloxygen? Whether you are an artist, craftsmen, woodworker, mechanic, boat builder, a brewer or self-proclaimed foodie, we guarantee you will be using Bloxygen all the time! Preserve, protect and prevent waste today!
FlowCast by EcoPoxy from epoxy.us

How to Use FlowCast: A Checklist and User Guide

 Directions, advice, list of supplies and details to help you successfully complete your epoxy resin project. The following information is helpful when using FlowCast casting epoxy. This epoxy is made for pouring deep layers 0.5 - 1.5 inches deep. If this describes your project. this is for you. For clear coating projects, use UV Poxy.