EcoPoxy Made Easy

NEW FlowCast SPR

NEW FlowCast SPR

NEW! FlowCast SPR (Small Projects Resin) is the ideal casting epoxy for weekend woodworking projects. When used at one-inch thickness, the maximum volume, and under the recommended conditions, expect projects to cure within one day.
FlowCast by EcoPoxy from epoxy.us

How to Use FlowCast: A Checklist and User Guide

 Directions, advice, list of supplies and details to help you successfully complete your epoxy resin project. The following information is helpful when using FlowCast casting epoxy. This epoxy is made for pouring deep layers 0.5 - 1.5 inches deep. If this describes your project. this is for you. For clear coating projects, use UV Poxy.

UV Poxy Instructions: User Guide

UV Poxy Instructions: User Guide

Easy to follow instructions for using EcoPoxy UV Poxy epoxy resin. How-to measure, mix, apply. Pro tips and tricks from US artist rep, Jane Biven.
The Cure for Cold Resin

The Cure for Cold Resin

Epoxy resin is sensitive to temperature and it's curing process can be compromised in low temperaturesFreezing causes the resin to crystallize or develop seed crystals and makes the resin much thicker than it's normal viscosity, reduce the polymer’s reaction rate, extend its cure time, and ultimately affect it's polymerization...
EcoPoxy Hack How to Choose

EcoPoxy Hack How to Choose

EcoPoxy epoxy resins are each designed for specific applications. The right choice for you will depend on how you intend to use it. Each type of epoxy resin is uniquely formulated and performs differently. Once you determine that epoxy resin is the right choice, you need to examine the options and select which EcoPoxy product is best suited for your project.