Small Project Resin FlowCast SPR | Product Info
FlowCast SPR: Small Project Resin
FlowCast SPR is a two component casting epoxy resin is intended to be used for smaller resin projects and cure faster (approximately 24 hours).
FlowCast SPR has been formulated to cure faster making it the ideal casting epoxy for weekend projects. When used under the recommended conditions, and following the instructions, you can expect your project to be ready for finishing within one day.
With the ability to cast from 1/4” to 1” thick per layer in pour volumes up to 2L, FlowCast SPR is perfect for small-scale live edge wood projects, and small-scale encapsulations. (i.e. river charcuterie boards, silicone molding, trays, coasters and HDPE forms and casting molds, etc...)
Use FlowCast® SPR epoxy by itself or pigments can be added to create an endless array of colors and effects.
FlowCast® SPR can be worked using the same tools you already have for woodworking (i.e. router, drill, lathe, saw, or sander, etc...) to make all kinds of beautiful creations.
- Cures in 24 hrs* *
- Bio-based epoxy resin
- UV Resistant ● Low Exotherm
- Pour 1/4 - 1 inch layers (max. volume 2 lt)
- No VOC's ● Low odor
- Crystal Clear ● High Gloss Finish
- Extremely Durable ● Impact resistant
- Excellent Bubble Release Qualities
FlowCast SPR Product Information
How To Use FlowCast® SPR
In a clean, dry container; combine (by volume) 2 parts resin with 1 part hardener, and mix thoroughly for 4- 5 minutes, scraping the sides and bottom of container many times. Then add desired pigments, continuing to mix 2- 3 minutes or until the epoxy is completely colored. After mixing, pour the epoxy into your mold. Check out my blog and/or product instructions for more details.
Indoors. Away from direct sunlight or heat sources. 60ºF through 78ºF with tightly sealed lids.
Unopened about 2 years, providing it is properly stored in sealed containers. Once opened, use within 3 months.
Working Temperature: 68-80ºF (21-27ºC)
Pot Time: 3-4 hours depending on ambient temperature
Workable/Cure Time: 24-36 hours depending on ambient temperature, humidity, and thickness
Recommended Thickness per Layer: 0.25 - 1 inches per Layer. Maximum volume 2 liters.
**Not recommended for pours less than 1/4 inch, sealing, or topcoating.
Viscosity (Thickness): Low Viscosity to Fill Tight Spaces and Excellent Air Release
Cure Appearance: Crystal Clear
Bio Content: 25%
Pigments Can Be Added: Yes
Clean Up: 99% Isopropyl Alcohol or Denatured Alcohol