FlowCast SPR is a casting epoxy resin for small projects that cures to a crystal clear, UV-resistant, glass-like finish in approximately 24 hrs (when used as directed in a climate-controlled environment)
Perfect for weekend projects, pouring 1/4 - 1-inch layers, casting in silicone molds, orgone pyramids, and other small casting or molding applications where a coating epoxy resin (UV Poxy) won't work and a deep-casting resin (FlowCast) takes too long to cure.
It should be poured a minimum of 0.25 to 1 inch deep layers. If you're making a charcuterie board, coasters, or a small serving tray, FlowCast SPR is the product you are looking for!
- UV Resistant/Non-yellowing
- 0.25 - 1 inch Layers
- Cures in 24 hrs (approx)
- 2:1 Ratio Formula
- No VOC's
- Low odor
- Crystal Clear
- Excellent Bubble Release Qualities
- Perfect for small casting/molding of 1 inch deep
**All epoxy resins are sensitive to temperature and humidity and should be used indoors in a climate-controlled environment for best results. A consistent temperature of 68º- 78º F is optimal.